Hamilton Buhl Buhl XMS - Manual (Page 6)

6
Section 2: Connecting to a TV
1. Connect the Composite AV cable by matching colors: red to red; white to white;
yellow to yellow. Connect the output port of the player to the input port of the TV
with the cables.
2. Connect the Component Video by matching colors: red to red; green to green;
blue to blue. Connect the Component Video output port of the player to the
Component Video input port of the TV with the cables. Your TV may or may not
support this.
3. Notes:
a. Make sure that all the cables are connected in right positions for both the
player and your TV.
b. Make sure that you have the right TV signal when connecting with TV. If
there is no display, press “TV” key on the remote control to switch the
output signal until you have the right signal. Use “HD” if your TV has the
“HD input”. You may then use the Setup menu to view additional settings.
c.
If connecting a VGA monitor, use a VGA cable (not included) and connect it
to the VGA Output, press the “TV” key on the remote control until the VGA monitor
display.