Hall Research VS-4A User Manual

Page 12

4 Channel VGA Switch w/Audio & Serial C

ontrol

ASCII p (or Hex 70)

Selects video input priorities.
The device will ask for the priorities for each of the four
inputs via a prompt the user must respond to.

“In X is [Y] (1-4)?” Where ‘X’ is the Video input and ‘Y’
is its current priority.

Entering ‘0’ for a video input priority will keep the existing
priority.
Priority can range from 1 to 4, 1 being the highest and 4
being the lowest.

For example, if Video #1 priority is set at 1, the unit will
select input #1 automatically whenever the presence of
the video at Video 1 input is detected even if the input
from the Video 2 input is currently playing. If no video is
detected for a specific video input, the next video input is
selected based on the priority setting in order.

ASCII r (or Hex 72)

Reset the unit back to factory defaults.
Priorities are set to 1,2,3,4
Scan time is set to 5 seconds
Front panel is unlocked

ASCII l (or Hex 6c)

Toggles the Front Panel key lock setting.