Hall Research SW-DVI-4A - Manual (Page 2)

SW-DVI-2A/4A User's Manual
2
Trademarks Used In this Manual
Hall Research, HRT, and (logo) are trademarks of Hall Research
Technologies, Inc. Any other trademarks mentioned in this manual are
acknowledged to be the property of the trademark owners.
Federal Communications Commission Statement
This equipment generates, uses and radiates radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device, pursuant to Part 15 of the FCC
rules. Harmful interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference, in
which case the user, at his own expense, will be required to take whatever
measures are necessary to correct the interference.
European Union Declaration of Conformity
This product has been tested and shown to comply with the
requirements of the European EMC directive 89/336/EEC
1.0 General
Thank you for purchasing Hall Research Technologies’ DVI Video Switcher.
The Switchers allow routing of multiple DVI equipped devices (such as PC’s) to
a single DVI display (such as plasma or LCD screen). The switchers support
single-link, DVI-I (integrated Analog and/or Digital) video signals at resolutions
of up to 1280x1024. The DVI Switchers feature front panel switches and
indicators for easy operation, plus they have intelligence to switch to active
video input when an input is unplugged or there is no video present.
2.0 Features
•
Clear & sharp image at resolution up to 1280x1024 (including 1080i).
•
Supports both digital and analog DVI signals (DVI-I), allowing you to
connect or switch between a DVI equipped PC and a VGA equipped
one (In this case HD15 to DVI cable will be necessary, and your DVI
monitor should be able to support DVI-I signal)
•
Hot pluggable
•
Auto skips over the powered off input (no video) and/or unplugged
cable
•
Supports the DDC2 standard for all input ports
•
1U rack design for 4-channel version (Model SW-DVI-4A)