Hall Research SP-HD-8A - Manual (Page 7)

HDMI Video Splitter, 8-Channel
5
3. Controls, Functions and Indicators
Figure – 1 Front Panel
The unit does not have an on-off button. The power indicator is illuminated when power
is applied to the unit.
Input Power Indicator
Source LED will illuminate when HDMI source signal is connected to the HDMI input
port.
HDMI Source Indicator
When the HDMI display is connected to the output ports, the corresponding LED will
illuminate.
HDMI Output Indicator 1- 8
Rear Panel
All video connectors are located on the rear panel. You must have at least one display
connected to one of the outputs.
HDMI Video Input and Outputs #1 and #8
Plug the included power supply to this jack. The LED on the front panel will illuminate
indicating power has been applied.
DC Input Power Jack
NEVER SUBSTITUTE ANY OTHER POWER SUPPLY AS THIS CAN DESTROY THE
UNIT.
Use only regulated 5v DC supply (center
positive) as supplied with the unit.