Denon AVR-3805 - Manual (Page 6)

- 6 -
COMMAND PARAMETER function example
CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP
SB DOWN CVSB DOWN
SB ** **:38 to 62 by ASCII , 50=0dB CVSB 50
MU ON OUTPUT MUTE ON/OFF change MUON
OFF MUOFF
SI PHONO Select INPUT source SIPHONO
CD SICD
TUNER SITUNER
DVD SIDVD
VDP SIVDP
TV SITV
DBS/SAT ---Select DBS function at AVR-3805 SIDBS/SAT
VCR-1 SIVCR-1
VCR-2 SIVCR-2
VCR-3 ---Invalid at AVR-3805 SIVCR-3
V.AUX SIV.AUX
CDR/TAPE1 ---Select CDR/TAPE function at AVR-3805 SICDR/TAPE1
MD/TAPE2 ---Invalid at AVR-3805 SIMD/TAPE2
ZM ON MAIN-ZONE ON/OFF change at AVR-3805 ZMON
OFF ZMOFF
Z1 PHONO MULTI ZONE-3 mode set , and select source at AVR-3805 Z1PHONO
| ---The name of PARAMETER is |
CDR/TAPE1 the same as that of the time of SI COMMAND. Z1MD/TAPE2
SOURCE MULTI ZONE -3 mode cancel at AVR-3805 Z1SOURCE
UP MULTI ZONE -3 VOLUME UP/DOWN , direct change to ***dB Z1UP
DOWN at AVR-3805 Z1DOWN
** **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) Z180
ON MULTI ZONE -3 ON/OFF change at AVR-3805 Z1ON
OFF Z1OFF
CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)