GoDEX Ethernet Control Center - Manual (Page 12)

Software Operation Manual 10
9. Click Apply to save your settings. And the server will reboot.
10. You have now finished the procedure of setting the wireless parameters.
＊ In infrastructure mode, Network Printer Server Control Center searches all channels to join the matched
wireless service set. In ad-hoc mode, Network Printer Server Control Center searches all channels to join
the matched wireless ad-hoc service set too, however, if none of them are found, Network Printer Server
Control Center creates that service set in the assigned channel.
＊ In ad-hoc mode, WPA-PSK/TKIP is not allowed.
3-3-3. Set Wireless Configuration Using Server’s Web Pages
1. You can see the IP address of Network Printer Server in the server list. Open IE Browser and type
server’s IP address or click the Home Icon of Network Printer Server Control Center.
＊ If the wireless parameters are not correct or not set yet, you have to use LAN to access Web Pages.
＊ If the TCP/IP parameters of Wireless LAN module are not correct, you have to use Network Printer
Server Control Center to set the TCP/IP parameters first.
2. Go to the web page and click "Login" link.
3. Login your administrator (default: admin) and password (default: admin).