Towing tips – Dodge 2009 Ram Chassis Cab User Manual
Page 301
The following chart identifies the maximum electrical
loads that the trailer tow output circuits are capable of
supporting.
Trailer Tow Additional Lamp Loads
Output
Functions
Maximum
Current
Additional Bulbs Al-
lowed. Example Only.
Other bulb combina-
tions can be used as
long as maximum cur-
rent is not exceeded.
Stop/Turn
Left
16A
2 #3157 bulbs for
stop/turn
Stop/Turn
Right
16A
2 #3157 bulbs for
stop/turn
Trailer Park
Lamps
14A
2 #1157 bulbs (two
filament park/stop/
turn) plus up to 24
#168 or #194 peanut
bulbs.
Towing Tips
Before setting out on a trip, practice turning, stopping
and backing the trailer in an area away from heavy
traffic.
Towing Tips — Automatic Transmission
The “DRIVE” range can be selected when towing. How-
ever, if frequent shifting occurs while in this range, the
“TOW HAUL” or “OD/OFF” range should be selected.
NOTE:
Using the “TOW HAUL” or “OD/OFF” range
while operating the vehicle under heavy operating con-
ditions will improve performance and extend transmis-
sion life by reducing excessive shifting and heat build up.
This action will also provide better engine braking.
The automatic transmission fluid and filter should be
changed if you REGULARLY tow a trailer for more than
45 minutes of continuous operation. Refer to the “Main-
tenance Schedule” in Section 8 of this manual for proper
maintenance intervals.
STARTING AND OPERATING
299
5