Ventilation/heat recovery unit design – Glow-worm Clearly Heat Recovery User Manual
Page 8
www.glow-worm.co.uk
8
Ventilation/Heat Recovery Unit Design
Description
The domestic ventilation unit consists of a central ventilation
appliance for air exchange with heat recovery and a remote
control. For summer operation, you can obtain a bypass as
an accessory. It can directly provide living rooms with cool
external air whenever it is necessary. The external air flow
bypasses the heat exchanger.
The unit is connected to an air ducting system, which is
equipped with silencers, pre-filters, fresh-air and exhaust-air
grilles and louvres.
Fresh air grilles supply fresh air to the living areas and stale
moist air is extracted from the kitchen, bathroom and WC.
With the digital remote control the user is able to
automatically switch and adapt the domestic ventilation unit
power to their own requirements.
The unit ensures:
– A constant air exchange in the building.
– The hygienic minimum air exchange in accordance with
UK building regulations Part F.
– Energy savings thanks to high efficiency heat recovery.
– A high hygiene standard due to the prevention of humidity
and mould damages of the building.
The exact model description of the unit is to be found on the
identification plate positioned below the unit.
Electrical Supply Failure
The appliance will not work without an electrical supply and
normal operation should resume when the electrical supply
is restored.
If the applaince does not resume normal operation, proceed
in accordance with the fault finding table in this document. In
case it is not possible to eliminate the fault contact
Glow-worm’s own service organisation using the telephone
number on the inside front cover of this booklet.