Generalmusic gk360 User Manual
Page 7
Page3
owners manual
gk360
<-------------- PIANO 1 -------------->
}КОИд
The gk360 has 178 PCM voices including 1 percussion kits that you can select and play on the
keyboard. After turning on, the gk360 sets to NORMAL/VOICE mode with the display showing
a black arrow pointing to the NORMAL mode in the top left hand corner of the display and
the VOICE 1 message at the center. In VOICE mode, you can select and play voices.
The playback starts automatically; when the Song reaches the end, it
goes to the next Song until you stop the playback; the 50 Demo songs
can also be selected with the numeric keypad. During the playback, it
is also possible to exclude the melodic line [MELODY OFF] and learn
to play the melody by following the notes shown on the display.
Listen to the Demo Songs
You can listen to the automatic playback of your gk360 to get an idea of what the instrument
is capable of doing.
1
Turn the power ON by pressing the [POWER] switch. After
a short period, the display will appear showing the NOR-
MAL playing mode with a piano sound (Piano1) ready to
play across the full keyboard
2
Turn the power ON by pressing the [POWER] switch. After
a short period, the display will appear showing the NOR-
MAL playing mode with a piano sound (Piano1) ready to
play across the full keyboard
3
Press the [DEMO] button to stop the Song at any point
of the playback. It is also possible stop the Demo with the
[START/STOP] button.
Note:
While the Demo song is playing, the buttons of the control
panel will be temporarily deactivated and it will not be possible
to play along with the song.
Basic Operation
This section explains all the basic operations that you can carry out when the instrument is in
NORMAL mode. Every time you turn on your instrument, it sets to NORMAL mode.
To return the instrument to NORMAL mode, press the
[MODE] button to the left of the display.
Selecting & playing Voices
If you play on the keyboard after turning the instrument on,
you will hear a piano sound (in this example, Voice 01, “Piano
1”) play across the entire keyboard. Select a Voice with the [–]
and [+] buttons In VOICE mode, the [–] and [+] buttons of
the numeric keypad allow you to step through the individual
Voices one by one. The [+] button selects in increasing nume-
rical order while the [–] button selects in reverse order. Holding
either button down scrolls rapidly forwards or backwards
through all the voices. The selected voice number is shown
in the bottom right hand corner of the display.
Play a single Voice