FeiYu Tech FY-605 Data Radio - Manual (Page 4)

Feiyu Tech FY- 605 Data radio User’s Manual
GuiLin FeiYu Electronic Technology Co., Ltd http://www.feiyudz.cn E-mail: [email protected]
Page 4
A. Connect FY-605 with the Computer and power, and choose the COM ports.
B. Search the radio, when search it successfully (the software will clew it), then we can read
and write the parameters.
C. To change parameters, you can choose the parameters you want to set, re-read after set it
ok, then you can know whether the parameters is you want.
The default COM and RF baud rate is 19200bps.When the RF baud rate is bigger than the
COM baud rate, it can transmit unlimited data at one time, and when the RF baud rate is
smaller than or was equal to the COM baud rate, may transmit 512 bytes data.
Note:
1. Two modules communicate or more modules, their frequency and RF baud rate should be
the same.
2. Module communicate with User’s Equipment, Their COM parameters should be the same.
The following table is FY-
605’s channel and frequency:
Channel Frequency Channel Frequency
1 430.2000MHZ 9 458.5250MHZ
2 431.4288MHZ 10 459.1250MHZ
3 431.7360MHZ 11 459.5250MHZ
4 430.5072MHZ 12 460.1250MHZ
5 434.6940MHZ 13 460.5250MHZ
6 434.2332MHZ 14 461.1250MHZ
7 433.1580MHZ 15 461.5250MHZ
8 433.9260MHZ 16 462.1250MHZ
6
、The Conversion between transceiver modules
It needs 1 ms time delay after the user’s equipment received the data and then transferred
the send data.