Settings – Denon DHT-FS3 User Manual
Page 14
ENGLISH
Get
ting
Star
ted
Installation
Connections
Oper
ation
Other
functions
Oper
ating
the
remot
e contr
ol
unit
Tr
oubleshooting
Specifications
Settings
• First make the settings for the listening room using the procedure
described at “Simple Setup
”.
• As necessary, set the details of the listening room, the tone and
various modes using the procedure described at “Detailed Settings
”
(vpage 11)
.
Simple Setup
[ON / STANDBY]
[QUICK SETUP]
[ui]
[SETUP]
[ENTER]
TYPE-1
TYPE-2
TYPE-3
A
4.9 feet /
1.5 m
6.9 feet /
2.1 m
8.9 feet /
2.7 m
B
CENTER
CENTER
CENTER
Movies/Music
MUSIC
MOVIE
MOVIE
Reverberations
in the room
MEDIUM
MEDIUM
SOFT
Room size
Approx.
107.6 feet² /
10 m²
Approx.
172.2 feet² /
16 m²
Approx.
215.3 feet² /
20 m²
B:
A:
Offset from the
center (OFFSET)
Distance
to listening
position
(DIST)
Press
.
• The input function is displayed for about 5 seconds on the display.
The input signal and surround mode indicators light (vpage 14).
b
When [ON / STANDBY] is pressed, the standby mode is set.
The “
4
” indicator lights on the display, and the input signal and
surround mode indicators turn off.
n
To turn the power off:
Press
n
To turn the power on from the standby mode:
Press [ON / STANDBY].
NOTE:
• A small amount of power is consumed when in the standby
mode.
• If the power is turned off by pressing
in the standby mode, the “
4
” indicator on the display may turn on
for a while.
If you wish to turn the power back on, wait at least 10 seconds
before doing so.
In the listening room, press
[QUICK SETUP]
.
TYPE-1
TYPE-3
TYPE-2
• The current setting mode is displayed for about 5 seconds.
• Upon purchase, the mode is set to “TYPE-3”.
Turning the power on
About the button names in these explanations
< >
: Buttons on the main unit
[ ]
: Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
[ui]
[ENTER]
0
ENGLISH
Set
tings