0 warranty – ENMET SPECTRUM-RAL-DC User Manual

Page 16

4.0 Warranty

ENMET warrants new instruments to be free from defects in workmanship and material under normal
use for a period of one year from date of shipment from ENMET. The warranty covers both parts and
labor excluding instrument calibration and expendable parts such as calibration gas, filters, batteries, etc.
Equipment believed to be defective should be returned to ENMET within the warranty period
(transportation prepaid) for inspection. If the evaluation by ENMET confirms that the product is
defective, it will be repaired or replaced at no charge, within the stated limitations, and returned prepaid
to any location in the United States by the most economical means, e.g. Surface UPS/RPS. If an
expedient means of transportation is requested during the warranty period, the customer is responsible
for the difference between the most economical means and the expedient mode. ENMET shall not be
liable for any loss or damage caused by the improper use of the product. The purchaser indemnifies
and saves harmless the company with respect to any loss or damages that may arise through the use by
the purchaser or others of this equipment.

This warranty is expressly given in lieu of all other warranties, either expressed or implied, including that
of merchantability, and all other obligations or liabilities of ENMET which may arise in connection with
this equipment. ENMET neither assumes nor authorizes any representative or other person to assume
for it any obligation or liability other than that which is set forth herein.

NOTE: When returning an instrument to the factory for service:

--

Be sure to include paperwork.

A purchase order, return address and telephone number will
assist in the expedient repair and return of your unit.

Include any specific instructions.

For warranty service, include date of purchase

If you require an estimate, please notify ENMET.