EMM Labs PRE2-SE User Manual

Page 15

015

Operational Features

PRE2 STEREO PREAMPLIFIER OWNER’S MANUAL

Programming Menu

2. Input Naming Menu (cont’d)

• DASH, PERIOD, and SLASH characters

• digits 0-9.

Rotating the Volume knob scrolls through the characters. Pressing one of Input Selector buttons shows the current name

of the input, and allows the name to be edited. The name being edited is stored only by pressing the ‘SAVE’ button on this

screen. Pressing another input button or selecting a different/same input discards the changes. Pressing the ‘Quit’ button

returns you to the ‘Programming Menu’ page, discarding any changes made.

3. Volume Display Units

The screen shows a sample value of the Volume display.

The ‘Change Units’ soft button toggles the Volume

display units to the following two options:

• Volume Step

• Gain in [dB]

The Volume knob is active and you can change the

sample value. The actual Volume (signal gain) is not

affected. The Volume display unit selected is stored only

by pressing the ‘SAVE’ button. Upon ‘EXIT’ after ‘SAVE’

the main screen will display the selected Volume display

unit. Pressing ‘EXIT’ without pressing ‘SAVE’ discards any changes.