Electrocompaniet ECD 2 - Manual (Page 6)

6
ENG
Technical specifications ECD 2
The following technical data were measured on randomized test objects
and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
No. of channels............................................................................2
Output Impedance...........................................................300 Ohms
Output level (Balanced).......................................................4.6 Vrms
Output level (Single-ended...................................................2.3 Vrms
Noise floor (20 - 20 kHz)...................................................< -145 dB
Frequency response.......................................................0.5 - 48 kHz
THD+N.........................................................................< 0,0005 %
Upsampling rate.......................................................192 kHz, 24 bit
Digital/Analog conversion.........................................192 kHz, 24 bit
Input sampling rate:
SPDIF Coax...................................................192 kHz, 24 bit
SPDIF TOSLink.................................................96 kHz, 24 bit
USB......................................... 192 kHz, 24 bit asynchronous
Power consumption (no load or signal)..................................... 40 W
Standby................................................................................10.2W
Dimensions
Width ................465 mm / 18.3 inches
Depth ................316 mm / 12.4 inches
Height ...............78 mm / 3 inches
Weight............... 8 kg. / 18 lbs
The manufacturer reserves the right to alter these specifications without further notice.