Electrocompaniet ECD1 V1 User Manual

Page 6

Technical Specification ECD 1

The following technical data were measured on randomized test objects and are
typical data.

All measurements are made at 120V / 240V // 50Hz / 60Hz

Analog stage

Output level (unbalanced).............................1,6 V
Output level (balanced).............................

.....3,2 V

Gain (unbalanced).........................................1.6 X (4 dB)
Gain (balanced).............................................

..3.2 X (10 dB)

Maximum output (balanced)..........................> 14 V RMS
THD (1 V out, 1 kHz)........................................< 0.002 %
Channel separation ( 1 V out, 1 kHz).........

..> 90 dB

Equivalent input noise....................................4 uV
Output impedance..........................................100 Ohm
Analog filter (-3 dB)....................................

......75 kHz

Digital stage

Dig.inputs..................................................

.......XLR-AES/EBU, RCA,

OPTICAL TOSLINK

Dig.outputs...................................................... .RCA, OPTICAL TOSLINK
Dynamic range................................................100 dB
Signal to noise................................................100 dB
THD.............................................................

.....-100 dB

Frequency response.................................

.....20 Hz - 20 kHz

Input / Output impedance (fixed)............

......75 Ohm

Sampling frequency in...............................

....32 - 48 kHz

Power consume.........................................

.....15 W

Dimensions
Width

483mm

(19”)

Depth

255mm

(10”)

Height

83mm

(3.2”)

Weight

5kg

(11lbs)

The manufacturer reserves the right to alter these specifications without further notice