Electrocompaniet EMP 1 - Manual (Page 25)

25
27. Audio Setup Menu
1 Press SETUP
2 Press ◄► to select the ‘Audio Setup’
icon.
3 Press ENTER/OK to confirm
28. Setting the analog output
Set Analog Output to match your player’s
playback capability.
1 In’AUDIO SETUP PAGE”, press ◄► to
highlight [ANALOG OUTPUT], then
press ►.
STEREO
Select this to change the channel output
to stereo, which only delivers sound from
the two front speakers and sub woofer.
VIRTUAL SURR
Select this to reproduce the surround
channels virtually.
MULTI-CHANNEL
Select this setting when using a multi
channel audio/( video) receiver with
6 channel inputs. In this mode, the player
performs DTS decoding or Dolby Digital
5.1-channel decoding when applicable,
and Dolby Pro Logic decoding on DVD-
Video, Video-CD and Audio CD discs
with 2-channel sound cracks. No Dolby
Pro Logic decoding is done which Super
Audio CD discs.
2 Press ◄► to select a setting, then press
ENTER/OK to confirm your selection.
29. Setting the digital output
The options included in Digital Audio are:
‘Digital Output’ and ‘LPCM Output’.
1 In ‘AUDIO SETUP PAGE’, press ▲▼
to highlight [DIGITAL AUDIO], then
press►.
2 Press ▲▼ to highlight an option.
3 Enter a submenu by pressing ►.
4 Move the cursor by pressing ▲▼ to high
light the selected item.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
OFF
Select to turn off the digital output.
ALL
Select if you have connected your
DIGITAL AUDIO OUT to a multi-
channel decoder/receiver.
PCM ONLY
Select only if your receiver is not capable
of decoding multi-channel audio signals.
LPCM OUTPUT
Select if you have connected this player
to a PCM-compatible receiver via a
digital terminal, such as the coaxial or
optical terminals. In this case, you may
need to adjust LPCM Output. Discs are
recorded at a certain sampling rate. The
higher the sampling rate, the better the
sound quality.
48 kHz
Select to playback discs recorded at the
sampling rate of 48 kHz. All 96 kHz
PCM data streams (if available) will be
converted to 48 kHz.
96 kHz
Select to playback discs recorded at the
sampling race of 9 kHz. If the 96 kHz
disc is copy protected, the digital output
will automatically be converted to a
sampling rate of 48 kHz
Setup Menu -
Audio
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
SPEAKER SETUP
CD UPSAMPLING
NIGTH MODE
AUDIO SETUP PAGE