Getting started – Electrocompaniet EMP 1 User Manual

Page 12

6 Select the corresponding setup that fit to

your installation for the Front, Center and

surround speakers.

OFF

(Only for CENTER and SURROUND

speakers)

Select when no Center speakers are connected

and you want the sound to be routed to the

left/right front speakers (Stereo).

LARGE

Select if the connected speakers can

reproduce low frequency signals below

120 Hz.

SMALL

Select if the connected speakers cannot repro-

duce low frequency signals below 120 Hz.

[SUB WOOFER]
ON

Select when a sub woofer is connected.

OFF

Select when no sub woofer is connected.

[SPEAKERS VOLUME]

Volume level setting for individual speakers

(-6dB ~ +6dB).

Note !
If you have EC4.9 in your system, use the
more advanced speaker volume and balance
setting included in that system.

[SPEAKERS DELAY]

Delay time settings in relation to the listen-

ing position distance for center and surround

speakers (0 MS~1S MS).

Press ◄► to adjust the setting that best suits

your surround sound needs.

Press ENTER/OK to confirm.

Notes:
Use a longer delay time setting when the sur-
round speakers are closer to the listener then
the front speakers.
A test tone will be automatically generated to
help you judge the sound level of each speaker

CENTER

SURROUND L

SURROUND R

AUDIO SETUP PAGE

0 Ms

Getting Started