Front panel, Navigator, Navigator window – Electrocompaniet ECI 6DS User Manual
Page 5
5
ENG
Audio
Source
Display
Text
Description
CD
CD
Analog balanced XLR input
AUX
AUX
Analog single-ended RCA input
DVD
DVD
Analog single-ended RCA input
HT
HT
Analog single-ended home theater RCA input
COAX 1
COAX1
Coaxial S/PDIF input up to 192 kHz/24 bit
COAX 2
COAX2
Coaxial S/PDIF input up to 192 kHz/24 bit
TosLink 1
TOSLNK1 Optical S/PDIF input up to 96 kHz/24 bit
TosLink 2
TOSLNK2 Optical S/PDIF input up to 96 kHz/24 bit
USB
USB
Asynchronous High Speed USB 2.0 input up to
192kHz/24bit
Front panel
(see illustration, page 18)
The main switch is located in the center of the lower part of the front
panel. In daily operation, switch off the ECI 6DS by using the STANDBY
button on the remote control. If the ECI 6DS has been switched off, allow
two hours of warm-up for optimal sonic performance. When the ECI 6DS
is not to be used for a long period of time, use the main switch to turn the
unit off. Then disconnect the AC main cord for maximum safety.
Navigator
Button
Function
Description
UP
Volume Up
Increases the volume level.
DOWN
Volume Down
Decreases the volume level.
LEFT
Select source left
Selects the next source to the left.
RIGHT
Select source right
Selects the next source to the right.
Navigator window