Electrocompaniet AW2x120-M - Manual (Page 3)

Unpacking the amplifier:
Immediately upon receipt of the amplifier, inspect the carton for possible damage
during shipment. If the carton is visibly damaged, a claim must be filed with the
carrier as soon as possible.
Unpack the unit carefully, and please do remember to save all packaging materials
for future shipment. The carton and packaging have been designed to offer the
safest possible protection when transporting your amplifier.
The content of the carton is as follows:
1 pcs Electrocompaniet Ampliwire 2x120
1 pcs AC power cord
1 pcs Owners Manual
1 pcs Inspection Card
2 pcs ECP5XLR
1 pcs Spare fuse, 5.0 AT slow-blow 5x20mm (120V AC)
1 pcs EC 4.9 – AW 120 Communication cable
2.5 AT slow-blow 5x20mm (220V AC)
The actual spare fuse is located inside the AC 3 pin receptacle.
Connecting the AW 2x120
Connecting to mains
Check that the mains voltage printed on the rear panel of the amplifier corresponds
with the line voltage in the territory were you intend to use your amplifier.
How to avoid damages
A good operating practice is to turn off all equipment before any connections or
disconnection’s are made. Do not under any circumstances connect or disconnect
equipment when power is turned on. If you insist on connecting or disconnecting
while power is turned on, you should be aware that the design of the RCA plug
generates a large transient when inserting the plug. This could damage both the
speakers and the amplifier.
WARNING: To reduce risk of fire or electric shock, do not expose this appliance to rain
or moisture. Verify line voltage before use.
Do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel. The warranty in void if the product is tampered with by non
authorised personnel. Use only authorised Electrocompaniet service station.