EarthQuake W1265V - Manual (Page 6)

Operator's Manual
Viper® 212cc 4-Cycle Engine
Check for parts online at www.ardisam.com or call 800-345-6007 M-F 8-5 6
SPECIFICATIONS
Displacement / Cycle 212 cc / 4-Cycle
Ignition Type Electronic ignition
Cooling System Forced air cooling
Idling Carburetor Adjust 1600 +/- 160 RPM
Valve Clearance Cold engine-Intake: 0.15 +/- 0.02 mm; Exhaust: 0.20 +/- 0.02 mm
Maximum Torque 8.85 ft-lb @ 2500 RPM
Bore and Stroke 70 x 55 mm
Spark Plug Type F6TC, NGK: BP61S, CHAMPION: N11YC
Fuel Type Unleaded gasoline (low/no ethanol blends recommended)
Fuel Tank Capacity 0.95 gallon (3.6 liters)
Drive Shaft Type Horizontal, 3/4” straight, (3/16”) keyed shaft with ball bearings. Direction:
counterclockwise (facing shaft); Length: 2-1/4”; Central thread: 5/16”-24
Start Type Recoil
Maximum RPM 3600 RPM
Oil Capacity and Type ~0.63 qt / 20.2 oz (0.6 liters); SAE 10W30 (in freezing weather use 5W30)
Dry Weight 37.5 lb (17 kg)
Overall Dimensions 15.4” x 12.6” x 13.6” (390mm x 320mm x 345mm)
Fire hazards
Wear eye protection
Shock hazard
Hot surfaces
Toxic fumes
Moving parts
Read manual before operation
Slow
Fast
Fuel
Oil
Choke
On/Off
Fuel Shutoff
SAFETY SYMBOLS
C
G
Operational Control Symbols
The following symbols may be used on your engine to alert you to potential hazards or to give you guidance in operating your
engine. Look over them and understand their meanings before operating your engine.
Safety or Hazard Symbols
Hot! Do not touch!