EarthQuake 14268 - Manual (Page 6)

Operator's Manual
Viper® 212cc 4-Cycle Engine
6 For more information email [email protected] or call 800-345-6007 M-F 8-5
SPECIFICATIONS
Displacement / Cycle 212 cc / 4-Cycle
Ignition Type Electronic ignition
Cooling System Forced air cooling
Idling Carburetor Adjust 1900 +/- 100 RPM
Valve Clearance Cold engine-Intake: 0.05 +/- 0.1 mm; Exhaust: 0.05 +/- 0.1 mm
Maximum Torque 8.85 ft-lb @ 2500 RPM
Bore and Stroke 70 x 55 mm
Spark Plug Type For US product with engine 13434 use F6TC, NGK: BP6ES
For European product with engine 14316 use F6RTC, NGK: BPR6ES
Fuel Type Minimum 87 octane gasoline with NO ethanol content
NOTE: If using an ethanol blended fuel, a fuel stabilizer, mixed to
manufacturer specifications, is recommended
Fuel Tank Capacity 0.74 gallon (2.8 liters)
Drive Shaft Type Horizontal, 1” straight, (1/4”) keyed shaft with ball bearings. Direction:
counterclockwise (facing shaft); Length: 3-1/5”; Central thread: 3/8”-24UNF
Start Type Recoil
Maximum RPM 3800 RPM
Oil Capacity and Type ~0.53 qt / 16.9 oz (0.5 liters); SAE 15W40 (in freezing weather use 5W30)
Dry Weight 37.5 lb (17 kg)
Overall Dimensions 15.4” x 12.6” x 13.6” (390mm x 320mm x 345mm)
Fire hazards
Wear eye protection
Shock hazard
Hot surfaces
Toxic fumes
Moving parts
Read manual
before operation
Slow
Fast
Fuel
Oil
Choke
On/Off
Fuel Shutoff
SAFETY SYMBOLS
C
G
Operational Control Symbols
The following symbols may be used on your engine to alert you to potential hazards or to give you guidance in operating your
engine. Look over them and understand their meanings before operating your engine.
Safety or Hazard Symbols
Hot! Do not touch!