EarthQuake 16095 REV3 User Manual
Page 14
For additional information email
[email protected] or call 800-345-6007 M-F 8-5 CST
14
Operator’s Manual
Front Tine Tiller Badger 3365 Series
MAINTENANCE
Maintenance Schedule
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide
you with years of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance Operation
Page
Before
Each Use
50 hours or
Every Season
Check belt tension
15
X
Change forward belt
15
X
Engine maintenance
16, EM
X
X
Check oil level/change oil
16, EM
X
1
Clean tine axle shaft
16
X
Lubrication
16
X
EM = See engine manual
1 Change oil after the first five to eight hours of use, then after every 50 hours or every season. Change oil
every 25 hours when operating under heavy load or in high temperatures.
SERVICING THE ROTOTILLER
The following information will help you make the necessary
checks and perform the procedures required to follow the
normal care recommendations made for your rototiller unit.
If you prefer, your local authorized dealer can make these
checks and perform the required procedures for you.
Important: Use only approved Earthquake spare parts.
PREVENT ACCIDENTAL STARTING.
ENGINE MUST BE TURNED OFF AND COOL, AND SPARK
PLUG WIRE MUST BE REMOVED AND SECURED FROM
SPARK PLUG BEFORE CHECKING AND ADJUSTING
ENGINE OR EQUIPMENT. ACCIDENTAL ENGINE START
CAN CAUSE SERIOUS INJURY.
WARNING
16095-0002R1
SPARK PLUG WIRE