EarthQuake 9060300 - Manual (Page 17)

Operator’s Manual
Viper® 196cc 4-Cycle Engine
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 17
SPaRE PaRTS
Only use approved Viper® spares.
TROUBlESHOOTING aND REPaIR
At Viper®, we build quality and durability into the design of our
products; but no amount of careful design by us, and careful
maintenance by you, can guarantee a repair-free life for your
Viper® Engine. Most repairs will be minor, and easily fixed by
following the suggestions in the troubleshooting guide in this
section.
This section will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, you may want to rely on your
retailer, an authorized service center or Viper®. Viper® will make
the necessary repairs if a service center is not available. A parts
breakdown is located toward the end of this manual.
We will always be glad to answer any questions you have, or
help you find suitable assistance. To order parts or inquire about
warranty, call or e-mail us using the contact information found
in this section.
ORDERING REPlaCEmENT PaRTS
Parts can be obtained directly from the factory. To order parts
visit www.ardisam.com or call 1-800-345-6007.
For other general questions, you can e-mail us at info@ardisam.
com.
Please include the following information with your order:
1) Part numbers
2) Part description
3) Quantity
4) Model number and serial number
CaUTION
PRaCTICE SaFETY aT all TImES. ENGINE mUST BE
TURNED OFF aND allOWED TO COOl aND SPaRk
PlUG WIRE mUST BE DISCONNECTED BEFORE aT-
TEmPTING aNY maINTENaNCE OR REPaIR.