Dv Mark MULTIAMP MIDI PEDALBOARD - Manual (Page 8)

8
VOluMe peDAl
The MULTIAMP MIDI PEDALBOARD allows to connect an expression pedal to its EXP pedal input, it’s assigned by default to Control Change
#27 as for the VOLUME PEDAL function on the Multiamp (choose the SLOT of the preset where you want to assign the VOLUME PEDAL
pressing SLOT SELECT and use the UP/DOWN buttons to select the VOLUME PEDAL, then press ENTER and select the PEDAL and RANGE
parameters as you like and then STORE the preset).
To have access to the expression pedal parameters on the MULTIAMP MIDI PEDALBOARD, push the “MENU” button, then scroll the UP/
DOWN switches (8-4) until “Ped” (Expression Pedal) will appear on the display, then press “OK”. Select the parameters with the UP/DOWN
switches, press “OK” and then “ESC”:
MultIAMp MIDI peDAlBOARD fIRMWARe INfO
uSB
To have access to the pedal firmware info, push the “MENU” button, then scroll the UP/DOWN switches (8-4) until “InF” will appear on the
display, then press “OK”, the firmware version “F:x.x” will appear on the display. By Scrolling the UP/DOWN switches the Loader version
“L:y.y” will appear.
The USB port on the rear panel is for unit service/maintenance only.