Dv Mark MULTIAMP MIDI PEDALBOARD - Manual (Page 6)

6
> BANK MODE (6 PC footswitches and preset banks up/down)
It is possible to set the footswitches in BANK MODE (bAn), having the switches 8 and 4 to scroll preset banks (21) UP and DOWN , and the
other 6 switches associated to specific preset numbers.
To set the Incremental Mode push the “MENU” button, then scroll the UP/DOWN switches (8-4) until “PCF” (program change format) will
appear on the display, then press “OK”.
Select the “bAn” mode with the UP/DOWN switches, press “OK” and then “ESC”.
To return to the Normal mode push the “MENU” button, then scroll the UP/DOWN switches (8-4) until “PCF” (program change format) will
appear on the display, then press “OK”.
Select the “nor” mode with the UP/DOWN switches, press “OK” and then “ESC”.
Tuner function ( CC #28) is assigned by default to switch #2 (in PC mode). Hold switch #2 for few seconds to have access to the TUNER on
the Multiamp; to return to PC push one of the switches.
Tap Temp function (MIDI Note ON command, parameter note = 60, velocity > 0) is assigned to switch #3 (in PC mode), by holding switch #3
for few seconds you will have access to the TAP TEMPO function (a dot will appear on the display at 3rd digit “PC°” to show it’s activated), for
preset/s that include a DELAY effect. You can set the desired tempo by pushing multiple times switch #3; the led on the Multiamp will show
the selected tempo speed. To exit from the TAP TEMPO mode hold again switch #3 for few seconds.