Dream Property DM7025 + - Manual (Page 71)

- 71 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 / D M 7 0 2 5 +
11.5 RF output
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “System” and press the OK-Button.
¾ The “System” menu will open up.
2. Navigate to the option “RF output…” and press the OK-Button..
Connect a TV to the UHF-out using a coaxial cable.
Start a channel scan on your TV. The UHF-
Modulator is set to channel 36.
If this channel conflicts with any other existing
devices you can easily change it.
Use the Navigation-Buttons left and right to
change the values.
Press the green Options-Button to save the setting
or the red Options-Button to discard them.