Ditch Witch RT30 - Manual (Page 51)

Transport - 50
RT30 Operator’s Manual
Haul
CMW
Procedure
Inspect Trailer
1. Check hitch for wear and cracks. Lubricate if needed.
2. Check battery for 12V charge.
3. Inspect lights for cleanliness and correct operation. Inspect reflectors and replace if needed.
4. Check tire pressure. Check lug nut torque with a torque wrench. Adjust if needed.
5. Ensure trailer brakes are adjusted to come on in synchronization with tow vehicle brakes.
6. Check ramps and trailer bed for cracks.
Load
1. Fasten and adjust seat belt.
2. Start tractor. See page 42 for proper start-up procedures.
3. Raise attachment, but keep it low.
4. Release parking brake.
5. Slowly drive tractor onto trailer.
6. Position tractor on trailer deck for proper weight distribution.
7. Engage parking brake.
8. Lower attachment to trailer bed and turn tractor off. See page 44 for proper shutdown procedures.
9. Attach chains to tractor and attachments where tiedown decals are located. See page 48.
Crushing weight. If load falls or moves it could kill or crush you. Use
proper procedures and equipment or stay away.
To help avoid injury:
• Attach trailer to tow vehicle before loading or unloading.
• Load and unload trailer on level ground.
• Block trailer wheels.
Rollover possible. If machine rolls over, you could be thrown from seat
and killed or crushed. Wear seat belt.