Digiframe DF-F1045s - Manual (Page 7)

Folder Repeat
The Folder Repeat Setup Screen is shown below. Use the navigation
buttons to move through the options and press Enter to select.
Slideshow Setup Screen
• Selecting ON will turn on the repeat mode indefinitely, until the Stop
button is pressed. (Factory default mode)
• Selecting OFF will turn off the repeat mode. i.e. Your DigiFrame will
slideshow your photos only once and then stop.
Interval Time
The Interval Time Setup Screen is shown below. Use the navigation
buttons to move through the options and press Enter to select.
Interval Time Setup Screen
• You can set your DigiFrame to show each photo for 1, 3, 5, 10, 30 or 60
seconds by navigating to and pushing the enter key on the desired interval –
OR use the “Slide Transition” key on your remote during normal operation and
this will change the transition time “on screen”. Set to the desired transition
time and wait until the On Screen Display disappears. The selected Interval
time is now set.
7: Left to Right (roll)