Digiframe DF-F1045s - Manual (Page 13)

Digital Music Playback ——
The digital music playback is initiated in three ways: (1) only music files
are present in the device/card, (2) the Music option was selected from the
Multiple Contents in Card screen, or (3) the Music shortcut button on the
remote control was pressed.
In the digital music playback mode, the Music Library Screen will appear.
All the music files found in the device/card will be displayed in a continuous list
of music files. If the device/card has more than one folder and you desire to
playback the music files by folder, go to chapter six “File Library Management”
for how to access individual folders.
Use the navigation buttons to move through the music files. The
highlighted music starts to play automatically. Press STOP to stop the
playback.
If the Auto Start option in the SETUP menu is set to ON, the playback of
all files at power-up would be in effect and the Music Library Screen will not be
visible.
Music Library Screen
• If desired, press the REPEAT button on the remote control to set a new
repeat mode of your choice, different from the settings in the SETUP menu.
–REPEAT ALL: repeats all the files in the library sequentially
–REPEAT ONE: repeats the highlighted music only
–REPEAT OFF: music stops when the end of the library is reached.
• Press the M-SLIDE button on the remote control to initiate the Music
Slideshow. Photos must be present in order to have slideshow; otherwise,
it will only be music playback.
• Press the VOL button on the remote control to adjust the volume
• Press the MUTE button on the remote control to mute music.
• Press the HOME button on the remote control to jump to the main level of
the DMP application.
• Press the DISPLAY button on the remote control to display a Graphics
Equalizer to accompany the music playback. Pressing DISPLAY again will
hide it.
• Press the PHOTO button on the remote control to jump to the Photo
Thumbnails Screen. If no photo file is present, no action takes place.
• Press the VIDEO button on the remote control to jump to the Video
Thumbnails Screen. If no video file is present, no action takes place.
• Press the FILE button on the remote control to jump to the File
Management Screen.