Digiframe DF-F7008t - Manual (Page 11)

9.
Connection Cont’
Remove plastic from the remote control battery casing to activate.
To connect your DigiFrame to a computer: Use the supplied USB Cable.
This function is only for models with an internal memory device.
Note:-
Should be turned on when it is connected to a computer.
Cannot be operated when connected to a computer.
Should be restarted after USB cable is disconnected from
a computer.
1.
2.
3.
10.
Start-up Setting
Your Digiframe is factory set to “auto-start” photo slideshow.
(This can be changed in the menu).
After connecting the Photo Frame to the power
supply, switch the power to “ON” and the start-up
screen will appear:
Select “SETTINGS” by using left or right
button. Then press the enter button to go
to the settings menu.
To access MAIN MENU, push MENU.
Use the up and down buttons to go to the settings
menu for languages, pictures, clock, alarm, start-up,
video and default settings. Press enter to go to the
sub menu and use up, down and enter buttons to
make your selections. After finishing settings, press
the left button to go back to previous menu or press
menu button to go back to main menu screen.
Main menu screen