Deltech Fitness DF832- Pec Attachment - Manual (Page 10)

FIGURE A
ATTACH THE PEC CABLE TO THE CAM ON THE LEFT SIDE USING THE M8 x 25MM BOLT,
M8 WASHERS , AND M8 LOCKNUT. (SEE FIGURE A)
NOTE: THERE ARE ADJUSTMENT HOLES ON EACH CAM TO COMPENSATE FOR CABLE
STRETCH AFTER THE MACHINE IS USED FOR A WHILE.
RUN THE CABLE THROUGH THE LEFT SIDE SWIVEL PULLEY, DOWN THROUGH THE
FLOATING PULLEY, UP THROUGH THE RIGHT SIDE SWIVEL PULLEY AND ATTACH TO
RIGHT CAM.
TIGHTEN THE BOLTS ON THE SWIVEL PULLEYS.
SWIVEL PULLEY ASSEMBLIES
FLOATING PULLEY ASSEMBLY
CABLE INSTALLATION