Deltech Fitness DF838- Stack Loaded Lat Attachment - Manual (Page 7)

INSTALL THE 3-1/2” PULLEYS (L) INTO THE TOP FRAME (A) USING THE
PULLEY BUSHINGS (M), THE M10 x 75MM BOLTS (Q), AND THE M10 LOCK
NUTS (W).
NOW INSERT THE 2” x 3” CAP (K) INTO THE END OF THE TOP FRAME (A).
K
A
W
M
M
Q
L
TOP FRAME ASSEMBLY
(NOTE: THE NUTS USED ON THIS ARE
LOCKNUTS, THIS MEANS YOU MUST
TIGHTEN THEM DOWN PAST THE
PLASTIC INSERT.)