Deltech Fitness DF838- Stack Loaded Lat Attachment - Manual (Page 6)

INSTALL THE 3 1/2” PULLEYS (L) INTO THE FRAME USING THE M10 x 43MM BOLTS (U),
THE M10 FLAT WASHERS (W), AND THE M10 LOCKNUTS(X).
INSTALL THE RUBBER SHOE (J) ONTO THE BOTTOM SUPPORT.
FRAME ASSEMBLY
(NOTE: THE NUTS USED ON THIS ARE
LOCKNUTS, THIS MEANS YOU MUST
TIGHTEN THEM DOWN PAST THE
PLASTIC INSERT.)
L
L
U
W
W
W
W
X
J