Danby DPF074B1WDB - Manual (Page 6)

FEATURES
4
Freezer wire
shelf
Refrigerator
glass shelves
Lower door bin
Refrigerator door bin
Refrigerator door
Freezer door
Cover
Thermostat
control
Levelling
legs
OPERATING INSTRUCTIONS
TEMPERATURE SELECTION
The first time you turn the unit on, set the temperature control to “7,” the coolest •
setting.
The range of temperature controls are from position “0,” or NO COOLING to “7,” •
the coldest. After 24 to 48 hours, adjust the temperature control to the setting
that best suits your needs. The setting of “4” should be correct for home or office
refrigerator use.
NOTE:
If the unit is unplugged, has lost power, or has been turned off, you must wait 3 •
to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator-freezer will not start.
Turning the refrigerator temperature control to the “0” position stops the cooling cycle but does not shut off the power to the •
unit.