Da-Lite Manual Confidence Monitor Stand - Manual (Page 5)

5
10. Hang the monitor on the Zee-Bars making sure the top and
bottom notches on each Hanging Bracket are placed over the
upper and lower Zee-Bars.
11. Slide the Security Bar through the slots in the Hanging Brackets,
bolt one end to the Zee-Bar then secure the opposite end with
the pad lock. See Figure 6 & 7.
Figure 6
Monitor
(Not Included)
See
Fig.7
M
Figure 7
D
H
Security Bar
Zee Bar
E
Figure 8
B
G
Procedure (Continued)
12. Install tube enclosures. See Figure 8.
13. Install fasteners into top of Columns for theft deterrent.