beautypg.com

Care and maintenance – Dixon Kodiak Diesel 18626-106 User Manual

Page 43

background image

CARE AND MAINTENANCE

43

NEUTRAL SPRING ADJUSTMENT:

1. Loosen set screws on center spring stop collar

located on the control rods. (Requires a 1/8”
Allen wrench).

2. Swing control lever out. Tighten set screw on lock

collar.

3. Repeat for opposite side.

4. Engage parking brake and lower seat frame.

Release parking brake and swing control levers in. If
wheel creeps, repeat steps 1 and 2.

5. Stop engine and remove rear of machine from jack or

blocks.

6. Return the seat to the operating position.

7. Drive machine with both levers in top speed position.

If one side now drives slightly faster than the other
adjust forward speed bolt in to contact stop sooner.