Dixon Kodiak Diesel 18626-106 - Manual (Page 17)

SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
KODIAK ® DIESEL
CHASSIS: 11 GA - rectangular tube
SEAT: Designed for operator comfort by use of high-density closed
cell foam padded back and arm rests, upholstered with
Cordura
TM water-repellent fabric. Seat is adjustable fore
and aft. Mounted on operator suspension system.
MOWER DECK: Made of 11 GA and 7 GA fabricated welded construction with
multiple 1/4” and 3/8” reinforcement ribs. Three blades
combine for a 52” cut width. Cut height approximately 1.5” to
5” via 18 position lift handle with foot assist.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear
12cc pump with fans and TJ230 wheel motor.
ENGINE: The mower is powered by a 20 HP Yanmar Diesel twin
cylinder engine, overhead valve, liquid cooled, full pressure
lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES: Front 13 x 6.5 x 6 smooth tread (16-21 lbs)
Rear 23 X 10 X 10 Turf Master (8-14 lbs)
CAPACITIES: Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter &
Dixon Blue
TM 15w50 Synthetic Hydrostatic Fluid
Engine - 2 qts. SAE 10W30 (with filter)
Radiator - 50/50 mix
DIMENSIONS: Width 47” outside rear wheel measurement
(approximate) Height 46.5”
Length 79” hitch tab to front
Weight 1135 lbs.