Dukane DLP Data Video Projector 8406A - Manual (Page 44)

43
English
User Controls
1. Turn on DHCP to allow the DHCP
server to automatically assign an IP, or
manually enter the required network
information.
2. Then choose apply and press “
” button to complete the configuration
process.
3. Open your web browser and type in the
projector’s IP address from the OSD
LAN screen. The following web page will
display as below:
How to use web browser to control your projector
 When you used the projector IP ad-
dress, you will can not link to your
service server.
4. The crestron control settings can be
found in the [tools] tab.(see picture)
Please note, each field can only contain
a limited number of characters, as shown
in the table below. (spaces and the other
punctuation included):
Category Item
Input-Length
(characters)
Crestron Control
IP Address 15
IP ID 2
Port 5
Projector
Projector Name 10
Location 9
Assigned To 9
Network
Configuration
DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
User Password
Enabled (N/A)
New Password 15
Confirm 15
Admin Password
Enabled (N/A)
New Password 15
Confirm 15