Coda FET Phono Preamplifier 06X - Manual (Page 7)

dESIgN PHILOSOPHy 7
II. Source, Output and Power connections
III. Front Panel
The input and output connections are marked on the rear lip of the top cover of the
preamplifier. remember when connecting input and output cables to avoid inadvertently
swapping left / right channel connections. The connections are as follows:
after connecting the audio input and output cables and aC line input the preamplifier
will power on immediately; there is no power switch. The front-panel power led will light to
indicate the power is on.
1. ground Post
2. Unbalanced Input
3. Balanced Input
4. Unbalanced Output
5. Balanced Output
6. Ac Line Input
There are no front-panel controls. all controls are inside and are to be selected prior to
operation (see pages 4 and 5). The only function of the front panel is a power indicator
led, which backlights the window when the power is on.
cAUTION: IF a Power INTerruPTIoN oCCurs, TurN dowN The voluMe oF your
audIo sysTeM BeFore Power resuMes. suddeN Power surge CaN Cause aN ouTPuT
level sPIke whICh Could Cause daMage To your audIo sysTeM.
UNBALANCED INPUT BALANCED INPUT T H G I R T F E L RIGHT LEFT
PUSH
PUSH
! FOR CONTINUED PROTECTION AGAINST SHOCK OR FIRE HAZARD,DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
AC LINE INPUT SEE SERIAL TAG FOR POWER REQUIREMENTS
~
GROUND BALANCED OUTPUT T H G I R T F E L UNBALANCED OUTPUT RIGHT LEFT
1 3 4 5 6 2