ClearCube CD7600-Series - Manual

ClearCube Technology, Inc. 3700 W Parmer Lane Austin, Texas 78727 (512) 652-3500 www.clearcube.com
Cloud Desktop Quick Start Guide
Package Contents CD9600-series, CD7600-series (Tera2)
Cloud Desktop Overview
(NOTE: the terms Cloud Desktop and zero client are used
interchangeably in this document.)
A Cloud Desktop, or zero client, is a remote computing
device that connects a user’s monitors, keyboard, mouse,
speakers, and other peripherals to remote ClearCube PC
blades (computers) and to virtual desktops (VMs). As shown
below, computing resources are typically located in remote
data centers. Cloud Desktops enable users to work on a blade
or VM as if it is a local PC. The connection between the zero
client and the remote device is over PCoIP™ protocol. Inside
the remote device, a host card manages the PCoIP session.
Cloud Desktop connected to blade or to VM
Cloud Desktop Features
ClearCube ® CD9600-series and CD7600-series zero clients
connect to supported ClearCube PC blades containing Tera1
or Tera2 host cards and to virtual machines to provide:
• Up to four USB ports (depending on model)
• Support for copper or fiber Ethernet media (depending on
model)
• CD9600-series or CD7600-series (Tera2) Cloud Desktop
• Power adapter and cable
• Y-cable adapter for single-link-to-dual-link DVI (× 1 for
dual-monitor and × 2 for quad-monitor Cloud Desktops)
• This Quick Start Guide
USB Ports
(One or Two)
Power Button
and Indicator
Front
Smart Card Reader
Activity Indicator
PCoIP Session
Indicator
HD
Audio In
HD
Audio Out
Smart Card
Reader
( On Supporting Models Only )
DVI Connectors
(Two or Four)
USB Ports
Ethernet
Connector
(RJ45 or SFP)
Power Jack
MAC Address
and Serial Number
Rear
HD Audio Out
Kensington®
Security Slot
(on Top and
on Bottom)
Cloud Desktop with Monitors
and Peripherals
Network Infrastructure
Chassis with
Blades and VMs
Copper and Fiber Ethernet
(Network Media Varies by Model)
CD9600-Series, CD7600-Series (Tera2)