D-Link DFE-500FX - Manual (Page 8)

DFE-500FX Fast Ethernet Adapter, with Fiber Optic Interface, for PCI Bus
Installation
3
2 2
Installation
Unpack and Inspect
CAUTION: Under ordinary circumstances, a DFE-500FX
card will not be affected by static charge as may
be received through your body during handling of
the unit. In special circumstances where you
may carry an extraordinarily high static charge, it
is good practice to reduce the charge by
touching a ground before handling the adapter
card.
Open the shipping carton and carefully remove all items. In addition to this
User's Guide, ascertain that you have:
•
One DFE-500FX Ethernet Adapter Card.
•
One 3.5" diskette: DFE-500FX Software Diskette.
Installing the Adapter
1. Shut down the computer, unplug its power cord, and remove the chassis
cover.
2. Insert the contact edge of the DFE-500FX card into the connector of any
available PCI Bus Master expansion slot. Press the card firmly into the
connector such that the card’s contacts are fully seated in the connector.