Clay Paky SUPERSHARPY - Manual (Page 19)

19 SUPERSHARPY
OPTIONS MENU
LAMP DMX
It lets you enable (ON) the lamp remote control channel. Select OFF to turn off or disable this option.
SAFETY BLACK OUT
This allows the Dimmer's automatic lock option to be activated (ON) after 3 seconds with no incoming DMX signal. Select
OFF to turn off or disable this option.
PAN / TILT
Invert Pan
It lets you enable (ON) Pan reverse movement. Select OFF to turn off or disable this option.
Invert Tilt
It lets you enable (ON) Tilt reverse movement. Select OFF to turn off or disable this option.
Swap Pan-Tilt
It lets you enable (ON) Pan and Tilt channel inversion (and simultaneously Pan fine and Tilt fine). Select OFF to turn off or
disable this option.
Encoder Pan-Tilt
It lets you enable (ON) or disable (OFF) Pan and Tilt Encoder operations.
Press the UP and DOWN arrows/keys simultaneously in the "main menu” to quickly disable the Pan and Tilt
Encoder.
P/T Homing Mode
It lets you set the initial Pan and Tilt Reset mode.
•
Standard: Pan & Tilt are simultaneously reset.
• Sequenced: Tilt is reset first followed by Pan.
Pan Home Def Pos
It lets you assign the Pan channel “home” position at the end of Reset (without a DMX input signal), selecting one from
the 4 available positions:
• 0 degree
• 90 degrees
• 180 degrees
• 270 degrees (default)
TILT SENSOR
Allows you to enable (ON)/disable(OFF) the vertical test sensor of Tilt position.
SHUTTER
Shutter on error
It lets you activate (ON) automatic "Stopper/Strobe" closing in the event of Pan/Tilt positioning error. Select OFF to turn
off or disable this option.
DIMMER FILTER TYPE
It lets you best optimise the "Dimmer curve" according to that set on the control panel. One of the following 2 options can
be selected:
DMX follower
Dimmer movement speed/linearity follows the DMX values set by the panel.
Position dependent
Dimmer movement speed follows the DMX values set by the panel taking into account the physical Dimmer starting
position.
Continue ➔