Cino PL680BT HC - Manual (Page 6)

4
Pair iOS Device via HID Mode with Passkey
Visual Signal Acoustic Signal Screen
Step
status indicator link indicator
1.
Power on the scanner within Bluetooth
coverage of your iOS device.
2.
Scan the ”Uninstall” command listed
below.
blinks red and
green
alternatively
3.
Enable the Bluetooth ® function of your iOS
device to search Bluetooth device (here, it
is CINO’s scanner).
For this procedure, please refer to the User
Manual of your iOS device.
4.
Scan “HID Mode with Passkey”
command
During the pairing:
blinks blue 3 times
per 2 Sec.
5.
The scanner will be discovered by and
shown as ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” on the discovered
Bluetooth device list on your IOS device.
6.
Tap ”xxxxBT-xxxx” or “PxxxxBT-xxxx”,
a message shows and asks you to enter it
accordingly. Please enter that pin code by
scanning “Numeric Option Codes” and then
the “FIN” command listed in the next page.
7. The pairing is successful.
blinks blue 1 time
per 2.5 sec. 4 beeps in
ascending tone
8.
Launch any data editor App or function on
your IOS device and scan a barcode to
verify the pairing is successful.