Cino PL680BT HC - Manual (Page 4)

2
Pair iOS Device via HID Mode
Visual Signal Acoustic Signal Screen
Step
status indicator link indicator
1.
Power on the scanner within Bluetooth
coverage of your iOS device.
2.
Scan the ”Uninstall” command listed
below.
blinks red and
green
alternatively
3.
Enable the Bluetooth® function of your iOS
device to search Bluetooth device (here, it
is CINO’s scanner).
For this procedure, please refer to the User
Manual of your iOS device.
4. Scan “HID Mode” command.
During the pairing:
blinks blue 3 times
per 2 Sec.
5.
The scanner will be discovered by and
shown as ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” on the discovered
Bluetooth device list on your iOS device.
6.
Tap the ”xxxxBT-xxxx” or
“PxxxxBT-xxxx” to pair the scanner with
your iOS device.
7. The pairing is successful.
blinks blue 1 time
per 2.5 Sec.
4 beeps in
ascending tone
8.
Launch any data entering App or function
on your iOS device and scan a barcode to
verify the pairing is successful.
Note: I f your iOS device prompts any message or direction not mentioned above, please confirm or follow it.