Bonaire 3 Speed RF (Power House Option) - Manual (Page 4)

Bonaire 3 Speed Radio Frequency Control
Setup
Page 4
IDENTITY CODE
Before the Comfort Control will operate an evaporative
ON
◆ ◆ ◆ ◆ OFF air conditioning system, the receiver needs to learn
a unique identity code. To transmit an identity code to receiver
of the evaporative air conditioner, follow this procedure:
•
Switch the electricity supply to the heater "OFF" first then
"on” again.
•
Make sure Comfort Control displays "OFF".
•
Within 4 minutes of switching power on to the heater,
press and hold WARMER and ON ◆ ◆ ◆ ◆ OFF button both
together for five seconds. Press WARMER button before
ON
◆ ◆ ◆ ◆ OFF button.
•
When CO:dE flashes on the display, release buttons to
transmit the identity code.
Note: If problems occur with neighbouring Comfort Controls
inadvertantly operating this heater, then the identity code can
be changed by randomly changing dip switch settings 1 to 10
(see below). Repeat Identity Code Learn steps above, if dip
switch settings are changed. Otherwise the air conditioner will
not respond to the Comfort Control.
DIP SWITCH SETTINGS
A Evaporative Air Conditioning - OFF
Refrigeration Air Conditioning - ON
B 12 Hour Clock - OFF
12 Hour Clock - ON
C Degrees Celsius (C) = OFF
Degrees Fahrenheit (F) = ON
X Not Connected
1-10 Identity Code