Bonaire 3 Speed RF (Power House Option) - Manual (Page 2)

Bonaire 3 Speed Radio Frequency Control
Operating the Control
Page 2
USING THE EVAPORATIVE AIR CONDITIONER
The Vulcan comfort control is a replacement for the Bonaire 3
Speed radio frequency control.
Your Vulcan comfort control is designed for use with the BONAIRE
RF60 to RF195 Designer Series or the Powerhouse Vulcan central
heater.
To operate, open the comfort control door and go to the area
marked “FUNCTIONS”. All of the evaporative air conditioning
functions are printed in blue.
Press and release the HEAT ◆ ◆ ◆ ◆ FAN ◆ ◆ ◆ ◆ COOL button until COOL is
displayed.
If COOL without a Set Temperature is displayed, then continue. If
COOL and a Set Temperature are displayed, then you will need to
reset dip switch A (see page 4).
SELECTING THE OPERATING MODE
FRESH Fan only operation
COOL Fan and Pump
EXHAUST Fan in reverse function (where fitted)
Press and release FRESH ◆ ◆ ◆ ◆ COOL ◆ ◆ ◆ ◆ EXHAUST button to select
between functions as highlighted on the display. Any combination of
these functions will appear on the display depending on last settings.
SETTING THE FAN SPEED
Press and release ▼ or ▲ button to
select the fan speed.
EXHAUST
When in EXHAUST mode the fan will
only operate at high speed and cannot
be controlled to run slower.