Dixon 560 - Manual (Page 25)

CARE AND MAINTENANCE - MODEL 560
CLEANING THE MOWER:
A clean machine is a source of pride to the owner. However, cleaning by use of high pressure
commercial washes is not recommended. The high water pressure, combined with solvents
or alkaline detergents, can lead to corrosion of electrical components or damage to the sealed
bearings used on your mower. A better approach is the use of the mild household soaps and
low water pressure. A stiff brush can be used to loosen excess grass and dirt build up. Avoid
directing water pressure onto the mower deck hub assemblies, electrical wiring and engine
components such as air filter openings. To remove excess water which accumulated during
washing of the mower, either blow off with compressed air, if available, or start the engine,
allowing a long enough operation time to dry thoroughly. It is advisable to engage the mower
deck for a short time to disperse all water from pulleys and belts.
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL CHEMICALS
WHICH MAY DAMAGE OR CAUSE HARM TO PLANTS AND ANIMALS IN YOUR AREA.
Page 22