Bonaire Deluxe Wall Furnace - Manual (Page 6)

D ELUXE W ALL F URNACE
Page 6
Operating the Unit
Clock Setup
The clock can be changed by firstly touching the MODE button
for approximately 3 seconds. The clock format screen will
display.
If 24-hour clock format is desired, then touch either the UP or
DOWN button.
To change the hours touch the SELECT button. The hours will
flash. The hours are changed by touching either the UP or
DOWN buttons. If the button is touched continuously the
speed of change will increase. To change the minutes touch
the SELECT button. The minutes will flash. The minutes are
changed by touching either the UP or DOWN buttons. To
change the day touch the SELECT button. The day will flash.
The days are changed by touching either the UP or DOWN
buttons. Then touch the SELECT button to return to the
previous state.
Time setup is now complete.
Child Lock
To engage the Child Lock touch the UP and DOWN
together. When the child lock is engaged any button
touches or pressing ON/OFF will be ignored and the
Lock icon will display. To disengage touch the UP
and DOWN together for 3 seconds.
Fault Codes
When the unit malfunctions, the fault code Er will be
displayed. The unit can be reset by powering the unit
OFF (2 seconds minimum) then ON. Should the
malfunction persist, call Climate Technologies
Service for assistance and advise the fault code.