Avalue ESM-BYT - Manual (Page 56)

ESM-BYT User ’s Manual
56 ESM-BYT User’s Manual
Disabled hand-off support. The XHCI ownership change
should be claimed by XHCI driver.
EHCI Hand-off
Enabled
Disabled[Default]
This is a workaround for OSes without EHCI
hand-off support. The EHCI ownership change
should be claimed by EHCI driver.
USB Mass Storage Driver Support
Enabled[Default]
Disabled
Enable/Disable USB Mass Storage Driver
Support.
USB transfer time-out
1 sec
5 sec
10 sec
20 sec[Default]
The time-out value for Control, Bulk, and
Interrupt transfers.
Device reset time-out
10 sec
20 sec[Default]
30 sec
40 sec
USB mass storage device Start Unit command
time-out.
Device power-up delay
Auto[Default]
Manual
Maximum time the device will take before it
properly reports itself to the Host Controller.
‘Auto’ uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
3.6.2.12 Security Configuration
Item Options Description
TXE
Enabled[Default]
Disabled,
TXE.
TXE HMRFPO
Enabled
Disabled[Default],
TXE HMRFPO.
TXE FIRMWARE Update
Enabled[Default]
Disabled,
TXE FIRMWARE Update.
TXE EOP Message
Disabled
Enabled[Default],
Send EOP Message Before Enter OS.