Avalue ESM-QM77 - Manual (Page 68)

ESM-QM77
68 ESM-QM77 User ’s Manual
LVDS
Port-B (Add2 card)
Port-C HDMI
Port-D DP
has no effect if external graphics
present. Secondary boot display
selection will appear based on
your selection. VGA modes will be
supported only on primary
display.
Secondary IGFX Boot Display
VBIOS Default
CRT
LVDS[Default]
Port-B (Add2 card)
Port-C HDMI
Port-D DP
Select Secondary Display Device.
Add2 Card HDMI/DP select
HDMI[Default]
DP
Select Add2 card display as HDMI
or DP.
LCD Panel Type
VBIOS Default
640x480 18/1
800x600 18/1
1024x768 18/1[Default]
1280x1024 24/2
1024x600 18/1
800x600 18/1
1600x1200 24/2
1366x768 24/1
1680x1050 24/2
1920x1200 24/2
1440x900 24/2
1600x1200 24/2
1024x768 24/1
1280x800 18/1
1920x1080 24/2
2048x1536 24/2
Select LCD panel used by Internal
Graphics Device by selecting the
appropriate setup item.
Spread Spectrum clock Chip
Off[Default]
Hardware
Software
>>Hardware : Spread is controlled
by chip;>>Software : Spread is
controlled by BIOS.
ALS Support
Disabled[Default]
Enabled
Valid only for ACPI. Legacy= ALS
Support through the IGD INT10
function. ACPI= ALS support
through an ACPI ALS driver.
Active LFP
No LVDS
Int-LVDS[Default]
SDVO LVDS
Select the Active LFP
Configuration. No LVDS: VBIOS
does not enable LVDS. Int-LVDS:
VBIOS enables LVDS driver by
Integrated encoder. SDVO LVDS:
VBIOS enables LVDS driver by
SDVO encoder. eDP Port-A: LFP
Driven by Int-DisplayPort encoder
from Port-A. eDP Port-D: LFP
Driven by Int-DisplayPort encoder
from Port-D (through PCH).